Products

Products

Remote Control

Current position : Home > Products > LED Controller Serie... > Remote Control...

When you use remote control, you should know the operation of matching code and grouping, clear the code and regrouping. When matching code and grouping, please firstly choose the LED controller that you want to match, secondly turn off the electricity for 10 seconds, thirdly turn on the electricity within 3 seconds. When you turn off the electricity, press the button "Group On" of the group you want to assign, the lights will connect to the LED controller with flicking 3 times, then this group is matched successfully. The other groups can be also set by the same method. When clearing the code and regrouping, please firstly choose the lights you want to clear the cold, secondly turn off the electricity for 10s, thirdly turn on the electricity again, at the same time when you turn on the power (in 5s) of LED bulb, press the button "ALL ON" for 6 times, the lights will flick 6 times quickly, then the code is cleared successfully.
Remote control light switch is convenient in practical use especially for people who are disabled. Also, if users are busy doing something and not able to reach the light switches, a remote control light switch can help them. For further information about other remote control products, you can pay a visit to www.euchips.net


Remote Control