Products

Products

euchips Products

Current position : Home > Products > Light Control System... > Relay Controller... > 20A*12ch Relay Switc...

< >

20A*12ch Relay Switch Controller EUR1220

Item: EUR1220

Input voltage: 100-240VAC

Input control signal: DMX512(1990)/RDM,DALI IEC62386,EU-BUS signal

Max. carrying current: 20A*12ch

Equipments Size: 295.5*93.4*63.2mm(L*W*H),standard 35mm din rail

Pack size: 230*104*72mm(L*W*H)

G.W.: 1100g

Operational temperature: -20-40℃

MAKE AN INQUIRY NOW ADD TO INQUIRY BASKET

This item has added to inquiry basket.

Enter inquiry basket now.

This item was already in your inquiry basket.

Enter inquiry basket .

20A*12ch Relay Switch Controller EUR1220

The product adopts advanced microcomputer control technology, analysis widely used DMX-512 (1990) /RDM,DALI standard protocol, and EU-BUS protocol developed by EUCHIPS, output 12 relay switch signal. The maximum carrying current of each relay switch is 20A,the total 12 channel is 240A.In addition, the device can be connected into the Dynalite system by the Dynalite gateway (Note: the Dynalite trademark holder is PHILPS, the relevant right is owned by the holder of the trademark, the same below)

Feature

1. Meets DMX512(1990)/RDM,DALI IEC62386 protocol and EU-BUS protocol developed by EUCHIPS

2. Output 12 channel relay switch signal

3. Built-in LCD, the user can operate more conveniently

4. Set fades time of each channel separately, range of 0.1-60.9s

5. Standard 35 mm din rail, convenient installation

6. Relay switch channel can be turned on and off manually

7. Can save up to 8 events

8. Suitable for intelligent lighting control - Home Furnishing, office buildings, schools, stadiums, outdoor architecture etc.

Leave your suggestion and opinion to the product (Please fill out the information below.* indicates a required field.)

Product: *
Your E-Mail: *
Content: *
 
Browse Other Products
  • 2A*8ch Leading Edge Controller EUT0802
    2A*8ch Leading Edge Controller EUT0802 Item:EUT0802

    Input control signal: DMX512(1990)/RDM,DALI and EU-BUS signal

    Input voltage: 100-240VAC 50/60Hz

    Max output current: 2A*8ch

    Equipment size: 222.5*93.4*63.2mm(L*W*H),standard 35mm din rail

    Pack size: 230*104*72mm(L*W*H)

    G.W.: 1050g

    Operational temperature: -20-50℃

  • 5A*4ch Phase Cut & 0-10V Dimming Controller EUMA0405
    5A*4ch Phase Cut & 0-10V Dimming Controller EUMA0405 Item:EUMA0405

    Input voltage: 100-240VAC

    Input control signal: DMX512(1990)/RDM,DALI IEC62386,EU-BUS

    Maximum output current of phase cut: 5A*4(AC MOSFET, please take 5A*PF as output current limit for each circuit)

    Maximum output signal current: 20mA*4(for DC0-10V)

    The number of events(only for EUMA0405-DDLT): 8

    Maximum inrush current limit per channel: 100A

    Equipment size: 222.5*93.4*63.2mm(L*W*H),standard 35mm din rail

    Packing size: 226*100*68mm(L*W*H)

    G.W.:975g

    Operational temperature: -20-50℃

  • 20A*4ch Relay Switch Controller EUR0420
    20A*4ch Relay Switch Controller EUR0420 Item:EUR0420

    Input voltage: 100-240VAC 50/60Hz

    Input control signal: DMX512(1990)/RDM,DALI,and EU-BUS signal

    Maximum output current of relay switch channel: 20A*4ch

    Maximum output signal current of 0-10V: 20mA*4ch

    Dimension: 167*93.4*63.2mm(L*W*H),standard 35mm din rail

    Pack size: 185*100*68mm(L*W*H)

    G.W.: 580g

    Operational temperature: -20-40℃