Products

Products

euchips Products

Current position : Home > Products > Microwave Motion Sen... > 1-10V Dimming Motion... > 220-240VAC 1-10V Dim...

< >

220-240VAC 1-10V Dimming Motion Sensor (Enhanced Detection Zone) EUC049V

Item: EUC049V


Operating voltage: 220~240Vac, 50/60Hz

Rated load: 800W(inductive), 1200W(resistive)

HF system: 5.8GHz±75MHz, ISM wave band

Transmitting power: <0.5mW

Power consumption: ≤0.5W(standby), <1W(operation)

Detection zone: Max.(D x H):16mx15m

Detection sensitivity: 10%/50%/75%/100%

Hold time: 5s/30s/90s/3min /20min/30min

Daylight sensor: 2lux/5lux/10lux/25lux/50lux/100lux/ Disable

Stand-by period: 0s/5s/5min/10min/30min/1h/+∞

Stand-by dimming level: 10%/20%/30%/50%

Mounting height: 15m Max.

Motion detection: 0.5~3m/s

Detection angle: 150°(wall installation); 360° (ceiling installation)

Operating temperature: -35℃~70℃

IP rating: IP20



MAKE AN INQUIRY NOW ADD TO INQUIRY BASKET

This item has added to inquiry basket.

Enter inquiry basket now.

This item was already in your inquiry basket.

Enter inquiry basket .

220-240VAC 1-10V Dimming Motion Sensor (Enhanced Detection Zone) EUC049V



1-10V Dimming Motion Sensor EUC049V is an innovative and active motion detector with HF system 5.8GHz.Motion can be detected through plastic, glass and thin non-metal materials.


The sensors allow energy saving without compromising comfort. When used in combination with 1-10V dimmable

LED drivers or ballasts, they can achieve 3-step dimming function, which is perfect for use in some areas that

requires a light change notice before totally switch off.

Also, the 1-10V interface in the sensors can match up with stand-alone daylight sensor EUS01, and implement daylight harvesting, means the lighting system has automated controls that either turn off or dim artificial light in response to the available daylight in the space.




Feature


1. Automatic dimming when used in combination with 1-10V dimmable LED drivers or ballasts.

2. Built-in adjustable daylight sensor.

3. 1-10V interface can match up with stand-alone daylight sensor EUS01 and achieve daylight harvesting.

4. Compact size makes it suitable to fix within most luminaries.

5. Detection area, time delay and daylight threshold can be precisely set via DIP switch.

6. Wide detection area, range up to 16m in diameter.




Leave your suggestion and opinion to the product (Please fill out the information below.* indicates a required field.)

Product: *
Your E-Mail: *
Content: *
 
Browse Other Products